Step 5 Check your management PC to make sure it received an IP address on the 192.168.1.0/24 network using DHCP. Completing this step powers on the device.) Step 4 Check the Power LED on the front of the ASA if it is solid green, the device is powered on. Step 3 Connect the AC power connector of the power cable to an electrical outlet. Step 2 Connect the rectangular connector of the power supply adaptor to the power connector on the rear panel of the ASA. Powering on and Verifying Interface Connectivity Step 1 Connect the power supply adaptor to the power cable.
Step 2 Connect your devices (such as PCs, printers, and servers) with Ethernet cables to Ethernet 1 through 7. (By default, Ethernet 0 is the Outside interface.) Connect the other end to a cable/DSL modem or gateway router (the Outside network). Step 1 Connect one end of an Ethernet cable (not provided) to Ethernet 0 on the ASA. Clients on the Inside network obtain a dynamic IP address from the ASA so that they can communicate with each other as well as with devices on the Internet. Installing the Chassis The ASA ships with a default configuration that includes two preconfigured networks (the Inside network and the Outside network) and an Inside interface configured for a DHCP server.
0 kommentar(er)
